Retaining Wall Repair Or Replacement
We specialize in rebuilding retaining walls that have failed and/or collapsed.
Retaining Wall Repairs
It's pretty common for us to get called out to repair an existing retaining wall that has collapsed or failed in some way. This could be an old wood retaining wall that is rotting away or a block wall that is bulging or on the verge of collapse if it has not collapsed already.
Typically we don't recommend "repairing" retaining walls. The wall has failed for a reason and that reason is typically poor construction or a poor choice of materials. When a wall has failed we will usually recommend tearing the wall out and replacing it. This would include demolition of the old wall, re-excavating the area to allow for proper base materials, installation of proper drainage, and proper backfill. Building it right is the more cost effective option in most situations.
Rebuilding Failed Retaining Walls
If your existing retaining wall has failed and needs to be replaced it's usually more cost effective to demolish the old wall, remove the materials, re-excavate the site, install a proper base, geo-grid if necessary, install drainage, and build the retaining wall properly.
We specialize in rebuilding retaining walls that have failed and would be happy to provide you with a consultation if you have a wall that you believe needs to be replaced.
Request Your Retaining Wall Consultation
Questions About Retaining Walls?
Geogrid is essential in retaining wall construction as it enhances the wall’s stability and longevity. It's a geosynthetic material that reinforces the soil behind the wall, distributing pressure evenly and preventing collapse. Incorporating Geogrid is particularly important in walls over a certain height, with large surcharges such as vehicle parking, or in areas with very challenging soil conditions.
Adequate drainage is vital to the health of a retaining wall. Without proper drainage, water accumulation can exert immense pressure on the wall (hydrostatic pressure), leading to structural failure. We ensure your retaining wall includes a drainage system, like a gravel drain bed or drain pipes, to prevent water build-up and to protect the walls integrity.
Wall surcharges refer to additional loads or pressures applied to the top of a retaining wall, such as from nearby structures, vehicles, or sloped land. These surcharges must be considered in the design phase to ensure the wall can withstand these forces without compromising stability or safety.
The base of a retaining wall is the foundation upon which its strength and stability rely. A properly prepared base, typically consisting of compacted gravel, ensures even weight distribution and provides support, preventing shifting, tilting, or collapsing of the wall.
The height of a retaining wall is often regulated by local building codes and varies depending on the wall's location and purpose. Generally, walls over a certain height (usually around 4 feet) may require additional reinforcement, engineering input, or permits. We adhere to local Ohio regulations and best practices to ensure the safety and legality of your wall.
Rebuilding a failed retaining wall involves assessing the causes of failure, such as poor construction, inadequate drainage, or external pressures on a wall that wasn't built to handle them. We then come up with a plan to not only reconstruct the wall but also address these underlying issues with improved design, better materials, and proper installation techniques.
Unfortunately the wall rebuilding process often requires complete removal of the old wall so that everything can be done correctly.
The length of a retaining wall plays a big role in its design and stability. Longer walls may require additional reinforcement, such as more layers of Geogrid, or specific construction techniques to ensure the wall can effectively support the soil behind it and handle environmental stresses. We assess each project to determine the optimal design for the wall's length and intended purpose.
Yes, retaining walls can be constructed in various shapes, including curved, straight, or angular designs. The shape can influence the wall’s structural integrity and how it interacts with the landscape. We ensure that regardless of the shape, the wall is engineered for maximum stability and aesthetic appeal.
Integrating lighting into a retaining wall can enhance its aesthetic appeal and provide functional illumination. Options include embedded LED lights, or external lighting fixtures. We can help design a lighting plan that complements your wall and landscape.
Incorporating steps or stairs into a retaining wall design adds functionality and accessibility to different levels of your landscape. We ensure that these features are seamlessly integrated into the wall design, maintaining structural integrity.
Integrating planters into retaining walls is a great way to add greenery and visual interest. Planters can be built into the wall or placed on top, depending on the design. This not only enhances the wall’s appearance but also allows for easy gardening and can help with drainage and erosion control.